NATE NateChrony Variable Adapters

NATE NateChrony Variable Adapters

A variable adaptor for barrels that are not threaded. The variable adaptor is simply pushed onto the end of the barrel & tightened in place with the thumb screws. The bore & outer barrel MUST be concentric! Otherwise damage or injury could occur.
Select the maximum outer diameter of the barrel from the options. The adaptors can be adjusted from its maximum diameter down to its minimum. There are 2 sets of inserts which allows the adaptors to work all the way down to their minimum diameter, by replacing the inserts. It also saves you from having to purchase two different adaptors!
The barrel MUST make contact at FOUR points, as close as possible to the top & bottom of the barrel. If the adaptor is making contact at the middle of the barrel mis-alignment can occur.
Thumb screws are aluminium & supplied with either knurled or printed tabs.
Price is for 1 adaptor, with 1 set of screws.
The variable adapators require less clearance than our regular slimline adaptors, so will work with minimal clearance between the air tank and barrel.